Ensuring Immediate Safety

• Turn Off the Power Source: The first and most critical step is to turn off the power supply to prevent further danger.
• Ensure Safety: Make sure both you and the victim are in a safe environment before proceeding.
• Remove the Victim: Use a dry, non-conductive material like wood or bamboo to separate the victim from the electrical source.

Assessing Victim’s Responsiveness

• Check for Breathing and Responsiveness: Immediately check if the victim is breathing and responsive.
• Call for Help: If alone, shout for help to alert others. Call emergency services right away.
• Administer Initial Aid: If the victim is unresponsive, start administering first aid immediately.

Immediate Actions to Take

Seeking Help

• Alert Others: Loudly shout for assistance or instruct someone nearby to call for medical help.
• Remove Electrical Hazards: Clear any remaining electrical components from the victim’s vicinity.
• Contact Medical Services: Reach out to the nearest medical facility or health complex.

Assessing and Managing Respiration

1. Open Airway: Ensure the victim’s airway is clear.
2. Check Breathing: Determine if the victim is breathing normally.
3. Perform CPR if Needed: If breathing is abnormal or absent, start CPR immediately by applying chest compressions and rescue breaths.

Performing CPR Correctly

CPR Steps

• Position the Victim: Lay the victim flat on their back.
• Chest Compressions: Compress the chest 30 times in the center.
• Emergency Breathing: Perform mouth-to-mouth breathing.
• Continue CPR: Keep performing CPR until the victim starts breathing again or help arrives.

Treatment and First Aid Measures

Proper Treatment Steps

1. Monitor Breathing: Continuously check the victim’s breathing.
2. Inspect Injury Sites: Examine the victim for any injuries.
3. Remove Objects from Pockets: Take out any items from the victim’s pockets to avoid further injury.
4. Position the Victim: Place the victim in a safe and comfortable position.
5. Call for Medical Help: Contact an emergency room or a doctor for further assistance.

Managing Burns and Bleeding

Burn Management

1. Cool the Burn: Use cold water to cool the burned area.
2. Avoid Popping Blisters: Do not pop any blisters that form.
3. Avoid Certain Substances: Refrain from applying ice, creams, or oils to the burn.

Controlling Bleeding

1. Apply Pressure: Use a clean cloth to apply moderate pressure to the bleeding area.
2. Elevate if Possible: If feasible, raise the injured area above heart level.
3. Maintain Pressure: Continue applying pressure for at least ten seconds.
   Seek Medical Attention if
4. Bleeding Persists: If bleeding doesn’t stop, get professional medical help immediately.

Handling Broken Bones

Bone Integrity and Wound Care

1. Protect the Area: Ensure the broken bone is protected from further damage.
2. Set the Bone if Possible: If trained, try to set the bone back into place.
3. Bandage the Wound: Cover the wound with a sterile bandage.
4. Seek Immediate Medical Help: Contact medical services right away for proper treatment.

Final Considerations

Always prioritize safety when dealing with an Electric shock incident. Correct and timely first aid can significantly improve the victim’s chances of recovery. By following these steps, you can provide essential support in critical moments.